Miele · Dishwasher

i10

Water Intake Fault

Severity

High

If your Miele Dishwasher is displaying the error code i10, the control board has detected a fault identified as "Water Intake Fault". Understanding the root cause helps you avoid an unnecessary service call.

Owner's Summary

Your Miele dishwasher cannot fill with water. Miele machines are precise about water pressure — they require at least 14.5 PSI to fill correctly. Check the supply tap is fully open and the inlet hose filter is clean before suspecting a faulty valve.

Symptoms

Miele dishwasher not filling, i10 displayed, machine beeps and stops

Common Causes

Water supply tap closed or pressure too low
Inlet hose kinked or filter blocked
Aquastop fitting triggered due to leak
Faulty inlet valve

How to Fix

1 Open water supply tap fully
2 Clean inlet hose mesh filter at tap connection
3 Inspect Aquastop fitting for activation — replace if triggered
4 Replace inlet valve solenoid if it fails to open

Tools You'll Need

Pliers Soft Brush Towels / Bucket Flashlight

Most of these fixes need only basic hand tools. If your repair requires opening electrical housings or testing live components, a multimeter and basic electrical safety knowledge are essential — when in doubt, call a technician.

Technical Explanation

Miele's EGS control board monitors fill progress via a capacitive water level sensor. i10 is generated when the target water volume is not reached within the fill timeout. The board also monitors the Aquastop solenoid circuit and will post i10 if the safety hose has triggered.

Is It Safe to Keep Using?

Safe. Machine will not operate without water. Resolve within a few days.

Technician's Pro Tip

Miele dishwashers use a bi-directional Aquastop hose that contains an electronic water sensor — not just a mechanical float. If the sensor inside the hose detects any moisture, it cuts water flow electrically. Check the hose for kinks or damage as well as the indicator window.

Related Codes

E1 — Samsung Dishwasher

Water Supply Error

High

E2 — Samsung Dishwasher

Water Temperature Too High

Medium

E3 — Samsung Dishwasher

Water Not Heating

Medium

Frequently Asked Questions

What does error code i10 mean on a Miele Dishwasher?

Code i10 on a Miele Dishwasher indicates "Water Intake Fault." In practice, the most common trigger is water supply tap closed or pressure too low. Severity is rated high, and typical repair costs range from $0 to $180.

Can I fix i10 myself, or do I need a technician?

Many cases of i10 can be resolved without a technician. The first step to try: open water supply tap fully. If that doesn't clear the code, work through the remaining steps in the "How to Fix" section above before assuming a part needs replacing.

Is it safe to keep using my dishwasher with code i10 showing?

Safe. Machine will not operate without water. Resolve within a few days.

How much does it cost to repair i10 on a Miele Dishwasher?

Repair costs for code i10 typically range from $0 to $180. Tap and screen check: $0; Aquastop: $30–$80; Inlet valve: $50–$180. Costs on the low end usually reflect a DIY fix with no parts required, while the high end reflects a part replacement plus professional labor.

Estimated Repair Cost USD

$0 – $180

Tap and screen check: $0; Aquastop: $30–$80; Inlet valve: $50–$180