Live Guide
Samsung · Refrigerator

14 E

Room Temperature Sensor Error

Severity
Medium

Your Samsung Refrigerator stopped working and is showing error 14 E, which corresponds to a fault called "Room Temperature Sensor Error". This is one of the most searched error codes for this appliance — you are not alone, and there is a clear fix.

Owner's Summary

Your fridge uses an ambient temperature sensor to adjust how hard the compressor works based on the room it's in. When this sensor fails, the fridge may run more than necessary or fail to compensate for a hot kitchen. The sensor itself is an affordable part.

Symptoms

Samsung refrigerator running constantly or cycling oddly, 14 E error

Common Causes

  • Faulty ambient room temperature sensor
  • Sensor wiring fault
  • Sensor connector corroded
  • Control board not reading sensor signal correctly

How to Fix

  1. 1 Locate the room temperature sensor, typically near the control board or front grille
  2. 2 Test sensor resistance and compare to specification
  3. 3 Inspect and clean sensor connector
  4. 4 Replace sensor if resistance reading is out of range

Tools You'll Need

Multimeter Electrical Contact Cleaner Flashlight

These are simple, low-risk fixes most homeowners can do with tools already in a basic toolbox.

Technical Explanation

The ambient sensor allows the control algorithm to compensate compressor duty cycle for external room temperature, improving efficiency. 14 E is triggered when the sensor reading falls outside the expected resistance-temperature curve.

Is It Safe to Keep Using?

Low risk to food safety since internal cooling is typically still functional, but efficiency is reduced. Fix within a few weeks.

Technician's Pro Tip

This sensor is usually accessible without removing major panels — check behind the front kick grille first, as many models place it there for easy ambient air exposure.

Frequently Asked Questions

What does error code 14 E mean on a Samsung Refrigerator?
Code 14 E on a Samsung Refrigerator indicates "Room Temperature Sensor Error." In practice, the most common trigger is faulty ambient room temperature sensor. Severity is rated medium, and typical repair costs range from $20 to $150.
Can I fix 14 E myself, or do I need a technician?
Many cases of 14 E can be resolved without a technician. The first step to try: locate the room temperature sensor, typically near the control board or front grille. If that doesn't clear the code, work through the remaining steps in the "How to Fix" section above before assuming a part needs replacing.
Is it safe to keep using my refrigerator with code 14 E showing?
Low risk to food safety since internal cooling is typically still functional, but efficiency is reduced. Fix within a few weeks.
How much does it cost to repair 14 E on a Samsung Refrigerator?
Repair costs for code 14 E typically range from $20 to $150. Sensor: $20–$50; Labor: $50–$150. Costs on the low end usually reflect a DIY fix with no parts required, while the high end reflects a part replacement plus professional labor.
Estimated Repair Cost USD
$20 $150

Sensor: $20–$50; Labor: $50–$150